You are currently viewing How does hydro pneumatic pump works

How does hydro pneumatic pump works

Introduction of hydro pneumatic pump works

Hydro Pneumatic pump one of the types of positive displacement pump  How does hydro pneumatic pump works and that uses compressed gas to move a fluid, this pump operated by compressing

the fluid using compressed gas and discharging it through an outlet the compressed gas supplied by a compressor pressurized tank the hydro-pneumatic  used wide range commercial and industrial purpose such as chemical processing water treatment gas and oil there is high-efficiency low maintenance ability to handle fluid viscous hydro pneumatic various types such as pump

Rotary pumps, reciprocating pumps, diaphragm pumps typically made up pump body compressed gas sources inlet and outlet fluid and control system. how does hydro pneumatic pump works The compressed air stored in a reservoir and various applications such as powering pneumatic tools and hydro-pneumatic pumps used in manufacturing and industrial construction equipment How does hydro pneumatic pump works

How it works a hydro-pneumatic pump?

 The basic component of a hydro-pneumatic pump fluid reservoir fluid pump is a pressurized air chamber a piston or diaphragm and control valves

the fluid pump pressurized and then the direction into the air chamber.

The drive piston or diaphragm compresses air in the air chamber the compressed air stored

the reservoir  used for various purposes powering pneumatic tool valves which required less energy

to generate compressed air traditional air compressors hydro-pneumatic systems suitable for a variety of settings.

How it differs from traditional pumps

Traditional pumps such as centrifugal pumps or positive displacement pumps, and mechanical energy fluid moving through the system typically use water, oil compressed pump liquids not generated compressed which generates compressed air stored in a reservoir for various applications.

Traditional pumps can be less efficient hydro-pneumatic pumps are typically smaller and more compact than traditional pumps make suitable for tight space mobile applications and low-noise operation

Component of hydro-pneumatic pumps works

  • Air compressor
  • Air receiver tank
  • Hydro-pneumatic pump
  • Pressure switch and control valve
  • Water supply tank
  • Pressure gauge
  • Safety valves
  • Piping and fitting

    1. Air compressor

The air compressor component generated compressed air used to drive the water pump it provides and Powered gasoline or diesel

2. Air receiver tank

This is the storage device that holds the compressed air generated by compressor the air compressor hydro-pneumatic pump allowing smooth operation of the system

3. Hydropneumatics pump

The component of the system converts the energy from compressed air into mechanical energy to drive the water pump consists of a cylinder and piston compressed air driving to the water pump

4. Pressure switch and control valve

 control the system to ensure the correct amount of compressed air delivered to the hydro-pneumatic pump

5. water supply tank

Where the water stored being can an underground tank placed at a higher elevation point used to provide a gravity feed

6. Pressure gauge

used to measure the pressure in system allowing to be made  necessary

7. Safety valves

There are safety valves intended to open to release pressure if the pump fails system becomes blocked

8. Piping and fitting

connected to various components of the system and

transport water from the pump to the point used

Working Principle of hydro pneumatic pump works

The working principle of hydro-pneumatic pumps airlift pump is based on using compressed air to generate the energy needed to pump water. this basic component of the hydro-pneumatic pump system included an air compressor in the air receiver tank

hydro-pneumatic pump pressure switch and a control valve on the water supply tank the compressor air which stored in the receiver tank compressor air driven to the hydro-pneumatic pump converts the energy from the compressed air into mechanical energy to pump water the pressure switch and control valves ensure that amount of compressed air delivered to hydro-pneumatic pump.

How does hydro pneumatic pump works

 

 

The Hydro-pneumatic pumps itself typically composed cylinder and a piston when compressed air created a vacuum at bottom of the cylinder drawn from the water supply tank into the cylinder as the piston then moves down pushing the water out of the cylinder and into the piping system delivering it to point of use on the key advantage of hydro-pneumatic pumps they can use water from a depth of up to 50 meters this is due the fact the compressed air generated necessary suction lift the water to the surface

The hydro-pneumatic pumps required very little maintenance the only regular required maintenance replacement of the filter and lubrication of moving parts many benefits if hydro-pneumatic pumps are based use of compressor air generated energy needed to water pump hydro-pneumatic pumps highly efficiently and required minimal maintenance and can pump water highly efficiently they are limited by the environment a evaluate its suitability and professional t ensure that is the best solution.

What is a hydropneumatics pump?

A hydro pneumatic  pump also known airlift pumps types of pump used compressed air used to drive a cylinder piston mechanism which converts the energy from the compressed air into mechanical energy

the compressed air hydro-pneumatic pump can use water from depths up to 50 meters often used in application such irrigation water supply and industrial processes the relatively low maintenance and efficient but limited by the availability of compressed air may not suitable for use in a certain environment

Limitations of Hydro-pneumatic pumps

The Hydro Pneumatic Pumps are types of pumps that used compressed air power source pumps fluid they are often used in application high pressure required such as water treatment plant industrial setting ease of maintenance also some limitations to keep in mind are pumps for particular applications one main limitation of hydro-pneumatic pumps is high-cost pumps use compressed and other equipment can add the overall cost of pumps system making

it less cost of effective types of pumps some situations the cost of maintenance and repairs also be higher for hydro-pneumatic pumps Another limitation of hydro-pneumatic pumps is the noise level of compressed air system can be quiet can be a problem in certain applications this noise can be an operation can safety hazard in certain environments hydro-pneumatic pumps are not as silent.

other types of pumps certain setting such as hospitals schools residential area specification requirement hydro-pneumatic pumps require temperature range operate efficiently and safety if the fluid temperature exceeds the maximum limit the pumps might not be able to handle the heat.

Hydro pneumatic pumps have many advantages such as efficiency reliability and ease of maintenance but they also have some limitations  should be considered choosing a pump for a particular application it is aware of limitations

Read More>>>> Working principle of centrifugal air compressor

Application of Hydro Pneumatic pumps

1.      1. Irrigation
2.     Water supply
3.     Industrial processer
4.     Mining
5.     Aquaculture
6.     Flood control
7.     Sewage treatment

Advantages of hydropneumatics pumps
  1. Ability to pump water from deep death. the Hydro-pneumatic pump can use pump water that compressed air able to generate the necessary suction to lift that water to the surface
  2.  Low maintenance Hydro pneumatic pumps require very little maintenance the regular maintenance is the replacement of air filter lubrication moving part
  3.  Efficiency Hydro pneumatic pumps are highly efficient in converting the energy from the compressed air into mechanical energy pump water
  4.  Versatility Hydro pneumatic Pumps can use in a wide range of applications such as irrigation water supply and industrial
  5. low noise level hydropneumatics pumps are relatively quiet compared to other types of pump
  6. Suitable for remote locations hydro-pneumatic pumps can use in remote locations no other source of power is available
  7. can control easily Hydro pneumatic pumps handle high pumping heads and can deliver water to high-rise buildings

The Disadvantage of hydropneumatics pumps

  •  Initial cost high
  • compressed air requirement
  • Limited flow rate
  • Air leakage can cause problem
  • Air filter needs to be cleaned
  • Air pressure fluctuation
  • Risk of explosion
  • Can`t handle high temperature
  • Can`t handle high solids 

Conclusion

Hydro-pneumatic pumps are types of pumps that used compressed air power sources to pump fluids how does hydro pneumatic pump works

applications, where high pressure  required such as in water treatment plant industries hydro-pneumatic pumps, are efficient

reliable and easy to maintain they are a good option for many types of applications but may be the best choice for some specification with manufacturer professional field if hydro-pneumatic pumps are the best for a fit particular application.

Leave a Reply